In North Cornwall, the fit-out of an enviable K26 is close to completion
By Phil Lockley
At the yard of H Baumbach & Son at Hayle in North Cornwall, one of the most advanced Kingfisher K26 static-gear boats I’ve ever seen is being fitted out.
![](https://fishingnews.co.uk/wp-content/uploads/2023/07/2-Beryl-M-at-Newquay-2018-1-2-300x200.jpg)
The fit-out of the original, very successful Beryl M became a template for much of that on the new K26.
I reviewed Ben Eglinton’s present boat, the Holton 24 potter/netter Beryl M SS 8, in April 2018. It was acquired from a skipper in Belgium, and since it was a towing boat, it required a major rebuild to meet the requirements of Ben’s fisheries – potting, netting and line fishing. With his father – fisherman and boatbuilder Gary Eglinton – he stripped the Beryl M to its bare hull to become an aft-wheelhouse single-hander.
A couple of successful years on static gear went by, triggering plans for a replacement craft – one that Ben describes as ‘a boat for life’. The name and number of the Holton 24 have now been moved to his new K26. With the fit-out now almost complete, the vessel went into the water last week.
While the style of fit-out is similar to his previous boat, a number of minor changes have been made to improve the K26’s efficiency. Safety is also a prime requirement in the layout, and Ben regarded having an aft wheelhouse as essential. “I wouldn’t consider having a forward-wheelhouse boat,” he told me. “I don’t want to keep looking back to see what’s going on when shooting gear. I’ve worked on many fishing boats with a forward wheelhouse, and it’s just not right for me.”
![](https://fishingnews.co.uk/wp-content/uploads/2023/07/4-Ben-Eglinton-K26-March-2023-3-2-300x200.jpg)
During early stages of the build, Ben Eglinton took the decision to use a gunwale roller than a davit arm.
I asked Ben why he went for a boat measuring just 26ft in length, when the costings on a new build of something like a K33 are not a world away from that of his high-spec K26. Ben replied: “Going to a boat of 33ft in length wouldn’t be the best choice for the sort of work I do. It would bring me into the ‘big boat syndrome’ where you need more gear – more of everything, including the vessel’s upkeep. A K26 is sufficient for what I want.
“The standard of build is down to Alan Baumbach and local boatbuilder Mike Iles. So far, the MCA has been helpful in order for the boat to meet current regulations – several MCA inspectors have attended, and at other times surveyors from the Society of Consulting Marine Engineers and Ship Surveyors were involved. They were equally helpful.”
Read the rest of this article in full in the latest issue of Fishing News, click here to purchase this issue from just £2.50 here or subscribe to Fishing News from just £1.00 an issue here
![Subscribe](https://fishingnews.co.uk/wp-content/uploads/2024/08/FN_subs_footer_820x250px_AUG24.1LC.jpg)
![Subscribe](https://fishingnews.co.uk/wp-content/uploads/2024/08/FN_subs_footer_560x200px_AUG24.1LC.jpg)